Voice Dialing; Last Number Redial; Ending A Call; Call Waiting - LG HBS-500 User Manual

How to Use

Voice Dialing

- Briefly press the MFB to activate Voice Command. For best results, record the voice
dialing tag through your headset.
NOTE: If your handset does not support voice dialing, this action may activate Last
Number Redial.

Last Number Redial

- Press and hold the MFB for 1 second to activate Last Number Redial.
The headset will beep and then call the last number dialed.

Ending a Call

- Briefly press the MFB.

Call Waiting

- Answer a second call without hanging up the first call by pressing the MFB for 1
second. Press the MFB for 1 second to return to the original call.
- Briefly press the MFB to terminate both calls at once.

Rejecting a Call

- Activate call reject by pressing the MFB for 1 second when the handset rings.
* These functions may only be used if your handset supports them. For further
information about using these features, please consult your handset's user manual.

Mic Mute

- Press and hold the VOLUME UP and VOLUME DOWN buttons at the same time for
1 second to mute/unmute the Mic during conversation.

Volume Control

- Press the VOLUME button to adjust the speaker volume.
- To prevent hearing loss, which is caused by listening to music for long periods of
time, the HBS-500 will emit a long beep tone or two beeps when you use the upper
6 volume levels.

Vibrate Control

- To activate or deactivate device vibration, press and hold the VOLUME UP button for 2
seconds. You will hear "Vibrate on" or "Vibrate off" when it is activated or deactivated.
- When vibration is turned off, the headset will not vibrate when receiving an
incoming call or when it is out of range.
- Vibration will automatically be activated when the device is powered on.
8