Download Print this page

Electrolux 406288 Owner's Manual page 7

54 inch mower grass catcher
Hide thumbs

Advertisement

5
LOWER CHUTE (See Fig. 5)
1. Raise and hold defl ector shield in upright position.
2. Place slot in lower chute over tab on mower and position
lower chute over mower opening as shown.
3. Hook rear latch into fl ange hole on back of mower.
4. Hook front latch into hole in front gauge wheel bracket
or under gauge wheel bracket on mower without a hole
in bracket.
CAUTION: Do not remove defl ector
shield from mower. Raise and hold
shield when attaching lower chute
and allow it to rest on chute while in
operation.
DEFLECTOR
SHIELD
TAB
REAR LATCH
GUAGE WHEEL
BRACKET
FRONT
LATCH
FIG. 5
6
UPPER CHUTE (See Figs. 6A & 6B)
1. Lower mower to its lowest cutting position.
2. Assemble upper chute by inserting curved end into
hole in back of cover.
NOTE: Handle carefully so as not to damage full bagger
indicator.
3. Push in and turn upper chute until it is in line with lower
chute.
4. Align the bosses on lower chute with alignment slots
on upper chute and slide together.
5. Secure with rubber latch by hooking hole in latch over
latch pin.
UPPER
COVER
CHUTE
7
LEVEL MOWER
Be sure mower is properly leveled for best mower
per for man ce. See your tractors owner's manual for
ins truc tions
7
FULL BAGGER
INDICATOR
HANDLE
LOWER
CHUTE
FIG. 6A
ALIGNMENT
SLOT
LATCH PIN
RUBBER
LATCH
BOSSES
FIG. 6B

Advertisement

loading

  Related Manuals for Electrolux 406288

This manual is also suitable for:

960 72 00-1296072001200Ltt354