Download  Print this page

Advertisement

Specifications

Table 3-1
General
Temperature control
Calibration
● Type
● Zero value
● Span
Table 3-2
Measuring Response
Sensitivity (depending on applica‐
tion)
Linearity (depending on application) ±2% of span
Effects of vibrations
Repeatability in % of full scale
(Depending on application)
Table 3-3
Climatic conditions
Ambient temperature and humidity
Altitude
Maxum II Reference Manual
Manual, 7/2017, 2000596-001
±0.02°C (±0.05°F)
Comparison measurement with external standard
Manual or automatic
Automatic baseline correction
Standard sample cylinder (single or multipoint calibration possible)
±0.5% of span
Negligible
Range
2 and 100%
0.05 and 2%
50 and 500 ppm
5 and 50 ppm
0.5 and 5 ppm
-18 to 50°C (0 to 122°F) application-dependent
Specific installations may require additional environmental constraints. See the custom
documentation package.
Note: If the Maxum II is exposed to high condensing humidity with the electronics open
or without dry purge air applied, then it must be allowed to re-stabilize at the above
stated conditions for at least 8 hours before electrical power is applied.
** Depending on application characteristics such as number of detectors, oven tem‐
perature, and electronic loading, the acceptable ambient temperature range may be
reduced. For application-specific detail, contact Siemens through the Siemens Industry
Online Support (SIOS) website:
https://support.industry.siemens.com.
Up to 2000m (6561') for analyzers using 230VAC Supply
Up to 3000m (9842') for analyzers using 115VAC Supply
Value
±0.5%
±1%;
±2%
±3%
±5%
3
93

Advertisement

   Also See for Siemens Maxum II

   Related Manuals for Siemens Maxum II

Comments to this Manuals

Symbols: 0
Latest comments: