6. Disconnect the intrinsic safety wires from the studs above the PECM.
TIB Door Assembly
TIB Door and Display Cables
7. Pull out the SYSCON2.1 drawer and disconnect the display cables from the SIB3 as shown
below. The cables can then be pulled out through the rear of the cage.
Maxum II Reference Manual
Manual, 7/2017, 2000596-001
Electronic Compartment Component Descriptions and Maintenance Procedures
Intrinsic-Safety Ground Connection Points
Display Cable Routing
Display Cable Connectors In SYSCON2.1
2.10 Color Touchscreen
Display Cable Routing Into SYSCON