Download  Print this page

System Controller Version 2.1 (syscon2.1); Description - Siemens Maxum II Reference Manual

Hide thumbs

Advertisement

Electronic Compartment Component Descriptions and Maintenance Procedures

2.3 System Controller Version 2.1 (SYSCON2.1)

11.Ensure the correct fuses are in the correct positions, as shown in
Distribution illustration.
12.When the procedure is completed, follow the steps in the
Procedure .
2.3
System Controller Version 2.1 (SYSCON2.1)
2.3.1

Description

The System Controller (SYSCON2.1) is a combination of two interconnected boards that
together function as the control processor and motherboard for the Maxum analyzer.
The SYSCON2.1 consists of two boards, the Communication and Analytical Control (CAC3)
board and the SYSCON Interface Board (SIB3). The CAC3 contains the processor and
memory functions for the SYSCON2.1 as well as control of external Ethernet communications
(via the Ethernet Switch Board). The CAC3 is mounted on and operates in conjunction with
the SIB3. With the exception of external Ethernet, the SIB3 contains all interfaces provided by
the SYSCON2.1.
The CAC3 on the SYSCON2.1 stores the analyzer application database, combines all data
results, and performs additional high-level data processing and calculations. All network
communications, maintenance panel and analyzer functions are also coordinated by the
SYSCON2.1. The SYSCON2.1 provides communication between the Controller Board, I/O
Boards and the EC operating modules.
More information about the SYSCON can be found in the System Controller version 2
(SYSCON2.1) Installation Manual (Siemens part number A5E02643617001).
Additional Functions
● Processing and communicating the
measurement values
● Controlling system functions, such as
calibration
Software Support
The SYSCON2.1 is supported only by software version 5.2 or greater.
32
PECM AC Power
General Analyzer Startup
● Display and operator control
● Controlling associated systems, such as
gas supply
● Generating reports
Manual, 7/2017, 2000596-001
Maxum II Reference Manual

Advertisement

   Also See for Siemens Maxum II

   Related Manuals for Siemens Maxum II

Comments to this Manuals

Symbols: 0
Latest comments: