Troubleshooting
Symptom
No Power
Message not
transmitted
Hearing other
noises or
conversation on
a channel
Poor Audio
Quality
Try This:
Recharge or replace battery RLN6305 battery pack. Reposition
or replace alkaline batteries if the Alkaline Battery Frame
(RLN6306) has been purchased.
Make sure M is completely pressed while transmitting.
Recharge or replace batteries.
Verify the transmit light is illuminated solid green while speaking.
Frequency or Interference Eliminator Code may be in use,
change on all radios if possible. See "Programming the
Interference Eliminator Code" on page 29.
Scramble Code is On (2-watt models only), and/or setting does
not match other radios' settings.
Bandwidth of radios does not match. See "Programming
Bandwidth (when FCC allowable)" on page 30.
RDX
35