Exiting The Lenovo Bios Setup Utility Program - Lenovo ideacentre AIO 520-24 IKL Hardware Maintenance Manual

Ideacentre all-in-one 520 series
Table of Contents

Advertisement

a. If you do not want to save the settings, select Discard changes and Exit from the menu.
b. If you have changed these settings and want to return to the default settings, select Load Optimal
Defaults from the menu.

Exiting the Lenovo BIOS Setup Utility program

After you finish viewing or changing settings, press the Esc key to return to the Lenovo BIOS Setup Utility
program main menu. You might have to press the Esc key several times. Do one of the following:
• If you want to save the new settings, select Save changes and Exit from the menu. When the Save &
reset window shows, select the Yes button, and then press the Enter key to exit the Lenovo BIOS
Setup Utility program.
• If you do not want to save the settings, select Discard changes and Exit from the menu. When the
Reset Without Saving window shows, select the Yes button, and then press the Enter key to exit the
Lenovo BIOS Setup Utility program.
.
Chapter 5
Using the Setup Utility
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents