Table of Contents
Advertisement
Extras
190
You can group wallet data into profiles that can be
accessed, for example for making purchases online.
Due to the nature of the wallet, it will automatically
close after 5 minutes of inactivity. Enter the wallet code
to regain access to the contents. You can change this
automatic time-out period, if required. See "Changing
Wallet settings" on page 195.
Entering the wallet code
When you open the wallet for the first time, you must
create your own access code:
1. Enter a code of your choice (4 - 10 alphanumeric
characters), and press the
2. You will be prompted to verify the code. Enter the
same code and press the
your wallet code to anyone else.
Each time you open the wallet you will be prompted for
a wallet code. Enter the code that you have created and
press the
soft key.
OK
: If you enter the wallet code incorrectly on 3 consecutive
Note
occasions, the wallet application will be blocked for 5
minutes. The block time increases if further incorrect
wallet codes are entered.
: If you forget your wallet code, you will have to
Important
reset the code, and you will lose all information
stored in the wallet. See "Resetting the wallet and
wallet code" on page 195.
soft key.
OK
soft key. Do not give
OK
Advertisement
Table of Contents
