Installation Safety Instructions; Before You Begin - LG LSCG367ST Installation Manual

I N S TA L L AT I O N I N S T RU C T I O N S

INSTALLATION SAFETY INSTRUCTIONS

BEFORE YOU BEGIN

Read these instructions completely
and carefully.
Installation of this cooktop must conform with
local codes, or in the absence of local codes,
with the National Fuel Gas Code, ANSI Z223.1/
NFPA.54, latest edition. In Canada, installation
must conform with the current Natural Gas
Installation Code, CAN/CGAB149.1 or the current
Propane Installation Code, CAN/CGA-B149.2, and
with local codes where applicable. This cooktop
has been design-certified by CSA International
according to ANSI Z21.1, latest edition and
Canadian Gas Association according to
CAN/CGA-1.1 latest edition.
As with any appliance using gas and generating
heat, there are certain safety precautions you
should follow. You will find these precautions in the
lmportant Safety Information section in your User's
Guide. Read them carefully.
• IMPORTANT –
local electrical inspector's use.
• IMPORTANT –
codes and ordinances.
2
Save these instructions for
Observe all governing
Note to Installer: Leave these instructions with
the appliance after installation is completed.
Note to Consumer: Keep the User's Guide and
Installation Instructions for future reference.
NOTE: This appliance must be properly
grounded.
• The electrical diagram is in an envelope attached
to the back of the cooktop.
• Skill level – Installation of this appliance requires
basic mechanical skills.
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation is not
covered under the Warranty.
• Remove all tape and packaging.
• Make sure the burners are properly seated and
level.
• Take the accessory pack off of the cooktop
• Check to be sure that no cooktop parts have
come loose during shipping.