Introduction; Navigating In The System Manual; Preface - Siemens SIMATIC RF300 System Manual

Introduction

1.1

Navigating in the system manual

Structure of contents
Table of contents
Introduction
Safety instructions
System overview
RFID system planning
Readers
RF300 transponder
ISO transponder
System integration
System diagnostics
Appendix
1.2

Preface

Purpose of this document
This system manual contains all the information needed to plan and configure the system.
It is intended both for programming and testing/debugging personnel who commission the
system themselves and connect it with other units (automation systems, further
programming devices), as well as for service and maintenance personnel who install
expansions or carry out fault/error analyses.
Scope of validity of this document
This documentation is valid for all supplied variations of the SIMATIC RF300 system and
describes the state of delivery as of November 2009.
SIMATIC RF300
System Manual, 11/2009 - Zwischenstand 17.09.2009, A5E01642529-04
Contents
Organization of the documentation, including the index of pages and chapters
Purpose, layout and description of the important topics.
Refers to all the valid technical safety aspects which have to be adhered to while installing,
commissioning and operating from the product/system view and with reference to statutory
regulations.
Overview of all RF identification systems, system overview of SIMATIC RF300
Information about possible applications of SIMATIC RF300, support for application
planning, tools for finding suitable SIMATIC RF300 components.
Description of readers which can be used for SIMATIC RF300
Description of RF300 transponders which can be used for SIMATIC RF300
Description of ISO transponders which can be used for SIMATIC RF300
Overview of the communication modules and function blocks that can be used for SIMATIC
RF300
Description of system diagnostics available for SIMATIC RF300
Certificates and approvals

Accessories

Connecting cable

Ordering data

Service & Support

1
11