Physical And Electrical Specifications - IBM FlashSystem 900 Product Manual

Physical and electrical specifications

FlashSystem 900 has the following physical, electrical, and environmental specifications:
Dimensions and weight
o Width: 445 mm (17.5 in.) (19-inch rack standard)
o Depth: 761 mm (29.96 in.)
o Height: 86.2 mm (3.39 in.)
o Weight: 17.69 kg (39 lb)
Air temperature
o Operating: Minimum of 5°C (50°F) at 30.5 m below to 3,000 m above sea level (100 ft below to
9,840 ft above); Maximum rated up to 40°C (95°F) at 30.5 m below to 950 m above sea level,
de-rated 1°C for each 225 m above 950 m up to 3,000 m
o Non-operating: -10°C to 50°C (14°F to 125°F)
Relative humidity
o Operating: 20% - 80%
o Non-operating: 10% - 90%
Electrical power
o
Voltage range: 100-240 V AC
o Frequency: 50 - 60 Hz
Acoustical noise emission
o 7.2 bels (idling)
o 7.2 bels (operating)
Power consumption
o 1300 watts PSU, 900 watts maximum, 625 watts RAID5 typical operation, per 2U
Heat dissipation: 2133 BTU per hour (assuming 625W)
Warranty information and upgrades
IBM FlashSystem 900 is shipped with a one-year and a three-year warranty.
Technical Advisor (TA) support is provided during the warranty period. The TA enhances end-to-end
support for the client's complex IT solutions. The TA uses an integrated approach for proactive,
coordinated cross-team support to allow customers to maximize IT availability. TA support for
FlashSystem is delivered remotely and includes a documented support plan, coordinated problem and
crisis management, reporting on the client's hardware inventories and microcode levels, and consultation
about FlashSystem microcode updates. The Technical Advisor conducts a Welcome Call with the client
and provides a statement of work for this support.
Flash media within IBM FlashSystem is covered in full during the warranty and maintenance period. The
system is also Energy Star certified.
FlashSystem 900 Product Guide 21