Touchpad - HP Spectre x360 Maintenance And Service Manual

TouchPad

TouchPad board and cable spare part kits include replacement rubber feet.
Description
TouchPad
TouchPad cable
IMPORTANT:
Before removing the TouchPad, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the TouchPad:
1. Disconnect the TouchPad cable from the TouchPad board (1).
2. Remove the five Phillips M2.0×2.0 screws (2) that secure the TouchPad to the computer.
The TouchPad is located under the main system battery.
Bottom cover on page
Battery on page
22).
23).
Spare part number
913004-001
912992-001
TouchPad 41