D-Link DPH-150SE User Manual page 49

Do Not Disturb
Call Waiting
Call Waiting Notify
Anonymous Call
Anonymous Call Reject
Call Forward
Hot Line
Reject all incoming calls.
Enable or disable call waiting.
Enable or disable the reminding tone for Call Waiting
1. If DISABLE is selected, full URI and name are sent to the receiver's
phone when the user makes a phone call. The URI and name of the
caller are displayed on the receiver's phone.
2. When Full URI is selected, it uses "Anonymous" as its display name
and URI when the user makes a phone call. It may display
"Anonymous" or nothing on the receiver's phone.
3. When Display Name is selected, only the display name is replaced by
"Anonymous" when the user makes a phone call. It may display
"Anonymous" or nothing on the receiver's phone.
Select Enable to reject anonymous calls.
1. Click No Answer to enable call forwarding to another number when no
one answers the phone after 180s (default). The timer can be changed
from 0-600s. Refer to section 6.18 to change the timer.
2. Click Busy to enable call forwarding to another number when you are
busy on the phone.
3. Click Unconditional to transfer all incoming calls to another number.
Enter the call forwarding number in the text box.
1. Enable or disable Hot Line
2. Number: a phone number which is the destination of the Hot Line
3. Timeout: the time after which the phone will dial the pre-configured
48