Download  Print this page

Pleth Wave - Philips HeartStart MRxM3536A Instructions For Use Manual

Hide thumbs

Advertisement

8 Pulse Oximetry

Pleth Wave

When the sensor is connected to the HeartStart MRx, the pleth wave is displayed in the configured
Wave Sector or the first available empty Wave Sector. It is drawn at an approximate speed of 25 mm/
second. Grid lines are displayed to indicate signal quality.When signal quality is good, the pleth wave is
auto scaled to the grid lines. When signal quality is poor, the size of the pleth wave is proportionately
decreased.
Figure 59 Pleth Wave Size
When the Therapy Knob is moved to an energy setting, the SpO
displayed as long as they are not located in Wave Sector 2 or you're in Q-CPR View. When the
Therapy Knob is moved to Pacer, the pacing status bar appears in Wave Sector 4, replacing the
waveform in that sector. If the pleth wave was removed, the SpO
are retained. If the Therapy Knob is moved to AED, SpO
monitored.
98
Monitoring SpO
values and pleth wave continue to be
2
and Pulse values and alarm settings
2
and pulse related information is no longer
2
2

Advertisement

Table of Contents

   Related Manuals for Philips HeartStart MRxM3536A

This manual is also suitable for:

Heartstart mrx m3535a

Comments to this Manuals

Symbols: 0
Latest comments: