Getting Started; Remote Control (Rc-406); How To Replace The Battery; Set The Clock And Date - Kenwood KDC-X702 Instruction Manual

BASICS

Remote control (RC-406)

This unit can be remotely controlled with an optionally purchased remote
control.
Remote sensor
(Do not expose to bright sunlight.)
: Remote control functions are not available.

How to replace the battery

To On the remote control
Turn on the power Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Adjust the volume Press
• Press and hold
the volume to 15.
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source Press SRC repeatedly.
4
ENGLISH
Pull out the insulation sheet when
using for the first time.
or .
to continuously increase

GETTING STARTED

1

Select the display language and cancel the demonstration

When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES], 5), the display shows: "SEL LANGUAGE" "PRESS" "VOLUME
KNOB"
1
Turn the volume knob to select [ENG] (English) or [SPA] (Spanish),
then press the knob.
[ENG] is selected for the initial setup.
Then, (except for
"PRESS" "VOLUME KNOB".
2
Press the volume knob.
[YES] is selected for the initial setup.
3 Press the volume knob again.
"DEMO OFF" appears.
2

Set the clock and date

1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour Minute
5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6 Turn the volume knob to select [12H] or [24H], then press the knob.
) the display shows: "CANCEL DEMO"