Wavetronix smartsensor advance User Manual page 109

CHAPTER 10 • TEMPLATES
108
Note
If the modified template results are accepted, the invalid zones will be deleted from
the channel configuration. It is strongly advised that you manually inspect the chan-
nel configuration and make modifications as required. You should always verify chan-
nel performance before terminating the configuration process.
If necessary, the desired template can be copied and modified in a text editor to accommo-
date the sensor's position, or the channel can be configured in the software.
Changes that have not been written to FLASH memory will be lost the next time the sen-
sor reboots.
Copying/Pasting Channels, Alerts and Zones
In some cases it may be useful to copy and paste a channel, alert or zone. To copy a channel,
right-click on the Channel tab and select Copy Channel; to paste a channel, right-click on
the Channel tab and select Paste Channel (see Figure 10.5).
Note
To copy and paste CAZ elements using a Pocket PC, press and hold the stylus on the
Channel, Alert or Zone tab and select Copy or Paste.
Figure 10.6 – Copying (left) and Pasting (right) CAZ Elements