Set Up A Dynamic Dns Service Account; Create Static Routes - TP-Link TL-WR941HP User Manual

Chapter 10
4. Enter the Description
5. Tick the Enable This Entry

10. 4. Set Up a Dynamic DNS Service Account

Most ISPs assign a dynamic IP address to the router and you can use this IP address
to access your router remotely. However, the IP address can change from time to time
and you don't know when it changes. In this case, you might apply the DDNS (Dynamic
Domain Name Server) feature on the router to allow you and your friends to access your
router and local servers (FTP, HTTP, etc.) using a domain name without checking and
remembering the IP address.
Note: DDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced >
3. Select the DDNS
account, you have to register first by clicking
password and domain name of your account.
4. Click Login and Save.
Tips: If you want to use a new DDNS account, please click

10. 5. Create Static Routes

Static routing is a form of routing that is configured manually by a network administrator
or a user by adding entries into a routing table. The manually-configured routing
information guides the router in forwarding data packets to the specific destination.
I want to:
for this entry.
checkbox and click OK.
Network > Dynamic
Service Provider: NO-IP or DynDNS. If you don't have a DDNS
Visit multiple networks and servers at the same time.
Customize Your Network Settings
DNS.
Go to register. Then enter the username,
Logout first, and then log in with a new account.
49