Download  Print this page

Stopping Reports Printouts; Setting Up Reports - Philips M8102A Instructions For Use Manual

Patient monitor.
Hide thumbs


19 Printing Patient Reports
Report types
Alarm Limits Report
Realtime Reports
Battery Report
Central Report A/B/C These are reports configured at the

Stopping Reports Printouts

To stop Reports printing, in the Reports menu, select
– Delete Report to stop the current print job
– Delete All Repts to cancel all queued report printouts
– Scheduled Rep. to toggle to Off and switch off scheduled reports.

Setting Up Reports

ECG report layout and Auto Reports settings must be defined in Configuration Mode.
The content you define in the individual Setup Reports menus will be used in all reports of this
type: for example, if you set a print speed of 50 mm/sec in the ECG Reports menu, every ECG
report will be printed at this speed, irrespective of format.
Setting Up ECG Reports
The settings you choose in the ECG Reports menu apply for all ECG reports printed. To set up
ECG Reports,
Select Main Setup -> Reports -> ECG Reports. Note the report layout configured for
your monitor, either Internat. or Cabrera. This
and can only be changed in Configuration Mode.
Select ECG Gain and set the required ECG Gain to define how ECG waves will appear on the
ECG report printouts.
Select Speed and select the report print speed.
Select Annotation and toggle to On if the printed ECG wave should be annotated with beat
labels or not. See the chapter on ECG for a list of beat labels. Pace pulse marks are automatically
printed beside the wave for paced patients.
Setting Up Vital Signs and Graphic Trend Reports
The settings you choose in the Vital Signs Report and Graphical Trend Report
menus apply for all Vital Signs and Graphic Trend reports printed.
Report contents
Graphic and numeric report of all
current alarm limits
Patient data and numerics, and either:
all displayed waves OR all measured
waves OR all measured RT waves
Battery serial number, information on
the currently-measured and potential
charge status of the battery
Information Center. Monitors connected
via the IntelliVue Instrument Telemetry
wireless network can have these reports
Stopping Reports Printouts
How to start printing reports
In the
Alarm Limits
Select the
Realtime Reports
Battery Status
In the
Print Status
In the
Main Setup
Central Report A
setting is inactive ("grayed-out") in Monitoring Mode
window, select
SmartKey, if
window, select


Table of Contents

   Related Manuals for Philips M8102A

This manual is also suitable for:

Intellivue mp2M3016aM3012aM3014aM3015a

Comments to this Manuals

Symbols: 0
Latest comments: