Your monitor is compatible with Philips measurement extensions for use with other IntelliVue patient
monitoring devices. These allow you to add specific measurements to those already integrated into
your monitor. These measurement extensions are referred to as MMS extensions.
The MMS extensions connect to the monitor and use the monitor's settings and power. Trend data
and measurement settings from the measurements in the extensions are stored in the monitor.
• Measurements from a MMS extension are only available when the extension is connected to the
monitor, and the monitor is running on AC mains via the external power supply (M8023A).
Measurements from a MMS extension connected to the monitor are not available when the monitor
is running on battery power.
• Any measurements on a MMS extension that conflict with those in the monitor cannot be used. For
example, only one CO
To separate an extension from the monitor, press the release lever and push the extension forward.
measurement is supported.
2 Basic Operation
M3014A attached to