Download  Print this page

Overview Of Recording Types; Creating And Changing Recordings Templates - Philips M8102A Instructions For Use Manual

Patient monitor.
Hide thumbs

Advertisement

18 Recording

Overview of Recording Types

Type of recording manual
Recording
Destination
Information
recorded
Number of waves up to 2
Speed
Runtime
Stops
Delay Time
Overlap
N/A = not applicable

Creating and Changing Recordings Templates

To save you defining recording settings each time you start a recording, you can create templates for
commonly-used types of recordings in the Setup Recording menu. You can create templates for
one delayed recording, one alarm recording and two realtime recordings (Realtime A and
Realtime B).
Changing recordings templates changes the settings that will be used each time a recording of this
name is triggered.
Select the Main Setup SmartKey to call up the Main Setup menu.
1
Select Recordings.
2
Select the Setup Recording pop-up key to enter the Setup Recordings menu.
3
Select the name of the template you want to create or change. Each recording name is linked to a
4
recording type: delayed, alarm, and realtime. Recording names can be changed in the monitor's
Configuration Mode.
Design the template by selecting each menu item and entering the information for the template.
5
• Recorder: choose which recorder the recording will print to (Central 2-Ch. or Central 4-
Ch. recorder, or a printer (for realtime reports in alarm recording only)).
• Channels 1 - 4: choose which waveform to record in each channel.
In addition to the currently available waves, you can choose from several other settings which make
an automatic allocation when the recording starts:
– Alarm Par will always record the measurement in alarm in the chosen recorder channel
– Primary Lead will always record the current primary lead in the chosen recorder channel
200
Delayed
central
from the start trigger
minus the delay time
50, 25, 6.25 mm/sec
N/A
automatically
10, 15 seconds
Off
On (up to 2 waves)
Alarm
automatic, triggered by defined alarm
conditions
central
from the start trigger
minus the delay time
up to 2
25 mm/sec
N/A
automatically
10, 15 seconds
Off
On (up to 2 waves)
Overview of Recording Types
Realtime (RT)
manual
printer
central
N/A
from the start trigger
N/A
up to 2
N/A
50, 25, 6.25 mm/sec
N/A
continuously
N/A
manually
N/A
none
N/A
Off
On (up to 2 waves)

Advertisement

Table of Contents

   Related Manuals for Philips M8102A

This manual is also suitable for:

Intellivue mp2M3016aM3012aM3014aM3015a

Comments to this Manuals

Symbols: 0
Latest comments: