Download  Print this page

Switching Qt Monitoring On And Off - Philips M8102A Instructions For Use Manual

Patient monitor.
Hide thumbs

Advertisement

Switching QT Monitoring On and Off

Switching Individual QTc Alarms On and Off
Each QTc alarm can be switched off individually.
To switch an alarm on or off, in the Setup QT Analysis menu, select QTc Alarm or
'QTc Alarm to toggle between On and Off.
Changing QTc Alarm Limits
Set the high alarm limits based on your assessment of the patient's clinical condition, unit protocols,
physician orders or medication specified limits.
In the Setup QT Analysis menu, select High Limit.
1
Select the appropriate setting.
2
Select 'High Limit.
3
Select the appropriate setting.
4
Switching QT Monitoring On and Off
To switch all QT monitoring on or off, in the Setup QT Analysis menu, select QT
Analys. to switch between On and Off.
7 ECG, Arrhythmia, ST and QT Monitoring
131

Advertisement

Table of Contents

This manual is also suitable for:

Intellivue mp2M3016aM3012aM3014aM3015a

Comments to this Manuals

Symbols: 0
Latest comments: