Snooze Function; Automatic Switch Off (Sleep Function) - Silvercrest 285662 Operation And Safety Notes

Snooze function

To switch off the alarm temporarily, press the SNOOZE / LIGHT /
DIM button
10
vated after approx. 6 mins.
When alarm is temporarily turned off, the dot appears on the
display next to the alarm (1 or 2) is blinking.
1

Automatic switch off (SLEEP function)

Note: Using the SLEEP function, the product switches itself off accord-
ing to a time set by you between 60 and 10 minutes.
To switch on the SLEEP function, press the SLEEP button
display a switch-off time of 60 minutes appears. To shorten the
1
switch-off time by a further 10 minutes, press the SLEEP button
again.
Press the SLEEP button
time is shown on the display
show up on the display
To switch off the SLEEP function, press the SLEEP button
edly until OFF shows up on the display
/ FM / AM button
Note: When sleep function is activated, the frequency band can-
not be changed between AM and FM.
while the alarm is ringing. The alarm will be reacti-
repeatedly until the desired switch-off
8
. After a few seconds the time will
1
again.
1
; the product will also switch off.
11
8
8
. Alternatively press the
1
GB/IE/NI
. On the
8
repeat-
21