Status Information Pane
The status information pane provides indications for the MR400 and wireless devices:
2‐16 System Overview Expression MR400 Instructions for Use
6 Suspend key places the MR400 in suspend mode
7 Audio Pause key temporarily deactivates alarms
8 Alarm key acknowledges an active alarm
9 1-Touch Alarms key sets all alarm limits according to preset calculation
10 NIBP Interval key accesses the automatic measurement Interval options
11 Clear Trends key clears stored trend data
12 Zero All key zeros all active invasive blood pressure channels
13 Setup key accesses the Monitor Setup, Printer, and Alarms menus
Communication and power indications will be displayed within 2 seconds.
Monitor network icon, which indicates the selected wireless
network channel (1, in this example) and, when pressed, allows you
to select the channel used by the MR400; see Setting the Wireless
Network Channel of the Cart on page 1-27 for details.
Indicates the battery time-remaining (given in an hours:minutes
format) until power will be exhausted for the wSPO2 module; also,
indicates that the wSPO2 module's communication with the
MR400 is good.