Acquisition and Control
Use of the MR400 is restricted to one patient at a time. The MR400 displays patient
measurements acquired during monitoring. Controls and settings for patient monitoring are
provided locally on the touch screen or remotely (for example, in the MRI control room) when
equipped with the IP5, where connections for the printer and the hospital network are also
The MR400 will automatically establish communication with the wireless modules, and IP5 (if
equipped). However, due to the use model, the devices can establish communication and
synchronize power‐on settings according to the start‐up sequence:
If using an IP5, patient identifiable information (name and ID number) will be available after
Expression MR400 Instructions for Use System Overview 2‐3
MR400 to IP5 (wireless)
If the MR400 boots and communicates first, then its settings will be reflected at the IP5.
If an IP5 boots and communicates first, then its settings will be reflected at the MR400.
MRI magnet room
Modules to MR400
MRI control room