When equipped with an IP5 and printer, the MR400 can produce hard copies of up to two
waveforms, trend information and patient data reports.
Printing Parameter-Specific Trends
Trended information can be printed separately for every parameter (except bellows‐derived
To print individual trend data
Controlling Printer Outputs
To start and stop the printing of a strip chart, press the Print key.
If the printer is allowed to run after printing, paper will continue to be output for about 30
seconds before automatically stopping.
13‐10 Trend Data and Printing
If a printer-equipped IP5 is not installed or connected, an indication is displayed on the
Print key; see page 13-11.
Any print command from the MR400 automatically initiates a 30-second print cycle at the
Any print command initiated from the MR400 takes precedence over the IP5 print functions.
Press the Trends key.
The Tabular Trends menu appears. Allow the trends data to
Select the trend button of the parameter that you want to print.
The corresponding vital sign data appears. The current page is
Select Print All to print all the data for the parameter, or select
Print Page to print the currently displayed data.
The data is printed at the IP5.
Expression MR400 Instructions for Use