To change the unit of measure
Changing the NIBP Alarm Limits
The NIBP Alarm Limits menu can be accessed by touching the alarm limit settings in the NIBP VS
12‐12 Monitoring NIBP Expression MR400 Instructions for Use
Press the Setup key and then the Monitor key.
The Monitor Setup menu appears. Current settings are displayed.
On the Monitor Setup menu, select Service(Bio‐Med).
The Service(Bio‐Med) menu appears.
On the Service(Bio‐Med) menu, select System Config.
The System Config menu appears. Current settings are displayed.
On the System Config menu, select Pressure Units.
The Pressure Units menu appears. The current setting is
Select the desired setting:
The setting is entered.
Alarm limit settings, NIBP VS box
NIBP Systolic Alarm Limits menu label (active adjustment shown)