To process the temperature sensor after use
No calibration of the temperature sensor is required. If the accuracy of a measurement is in
question or if a problem is suspected with the temperature option, perform the user routine‐
tests; see chapter 14.
TEMP VS Box
The temperature measurement is displayed as numeric information in the TEMP VS box. Other
data, including temperature‐related alarm information, are also provided in this area of the
screen, as detailed below.
Alarm flag area
11‐8 Monitoring Temperature
If a jacket was placed on the sensor, remove the jacket
and any medical tape (if used). Refer to your facility's
biohazard procedure for disposal of used jackets and
medical tape. Typically, jackets and tape are disposed
of as medical waste per facility procedures due to
Thoroughly clean and disinfect the sensor; see Cleaning,
Disinfecting, and Inspecting the Accessories, on page 14‐7, for
Store the sensor; see Connecting and Disconnecting the Sensor, on
page 11‐3, for details.
Displays TEMP alarm flags when detected; see page 4-31.
Expression MR400 Instructions for Use