Connecting and Disconnecting the Sensor
When inserting or removing the temperature sensor from the MR400, only use the connector and
never pull or apply excessive force or tension to any other portion of the device.
To connect the temperature sensor
Grasp the sensor connector then align the connector to the temperature port on the MR400 and
push the connector forward until you feel or hear it "click" into place.
To store the temperature sensor
When not in use, loosely loop the sensor and then drape it over an accessory hook.
To disconnect the temperature sensor from the MR400
Grasp the sides of the connector, and then pull the connector out of the
Expression MR400 Instructions for Use
Monitoring Temperature 11‐3