If Patient Type is set to Neo then Pediatric ECG is set to On and locked. When Patient Type is
changed to Adult, Pediatric ECG will be set to off and unlocked.
To control pediatric ECG filtering
Allows you to reduce the T‐wave amplitude when extremely large due to the
magnetohydrodynamic effect (MHD), which can prevent gating. Use for accurate gating when an
unusually high T‐wave amplitude, relative to the R‐wave amplitude, is produced.
The following options are available:
T-Wave Suppression is unavailable when Filter Mode is set to Monitor; see page 5-31.
Expression MR400 Instructions for Use Monitoring ECG 5‐33
Press the Setup key and then the Monitor key.
The Monitor Setup menu appears. Current settings are displayed.
Locate Pediatric ECG and select the desired setting:
The setting is entered.