Controls monitoring functions, as indicated by the absence or presence of the VS box for the
parameter, except ECG (see below).
Some parameters require optional equipment that may not be enabled or present on your system;
see System Config for details.
To open the Parameters menu
Press the Setup key and then the Monitor
key. On the Monitor Setup menu, select
The following parameters are available:
3‐18 Getting Started Expression MR400 Instructions for Use
Press the Delete Settings key.
Press the Save & Close button to save the current setup.
A warning box will appear, prompting you to accept the changes—
press Accept to save the current settings or press Cancel to reject
ECG allows electrocardiogram monitoring:
– Off turns off the ECG parameter. (Heart rate (HR) will remain in the VS box, allowing it
to be displayed from another source or if HR Source is set to Auto.)