Press the Setup key and then the Monitor
key. On the Monitor Setup menu, select Edit
The following options are available:
To add and save new user settings
3‐16 Getting Started Expression MR400 Instructions for Use
Factory recalls the factory settings
from memory, which cannot be modified. (Default)
Add New allows you to assign a file name, select a default setting, and store a current
setup in the memory (up to ten setups can be stored); see page 3‐7 for more information.
Backup/Restore allows you to backup and restore settings using a USB flash drive; see the
service manual (REF 989803181911) for details.
Setup the MR400 for the configuration to which these settings will
Press the Setup key and then the Monitor key.
The Monitor Setup menu appears. Current settings are displayed.
On the Monitor Setup menu, select Edit User Settings.
The Edit User Settings menu appears.
Select Add New.
The soft keyboard appears.
Enter a unique file name (of up to twenty characters) for the user
settings using the soft keyboard.
Press the Capture Settings button to enter the current setup data.