Connecting the SpO2 Cable
Connecting the SpO
Extension cables: Do not use extension cables with the IntelliVue TRx
Connect the sensor cable to IntelliVue TRx
Connect reusable sensors directly into the transceiver.
Connect disposable sensors into the adapter cable, then
connect the adapter cable to the transceiver. Remove the
Ensure that the sensor and connector are positioned away from
power cables, to avoid electrical interference.
Adjust SpO2 alarms in the patient Window (see "Telemetry
Controls in the Patient Window" on page 6-2).
Make other adjustments in the Telemetry Setup Window (see
"Patient-Configurable Settings in Telemetry Setup" on page 6-3).