The battery used is a 1.5 Volt 'AA' Battery. This supplies the
power for the ignition system of the cooktop. To install, follow
the safety instructions as shown on Figure 9 below.
NOTE: Pay special attention to the orientation of the battery
The battery supplied is a perishable item and not covered by
1.5V battery models
Battery holder installation instructions
1. Locate a convenient position to mount battery holder,
keeping it away from hot surfaces.
DO NOT attach it to the base of the cooktop.
2. Ensure mounting surface is clean.
3. Remove protective tape from rear of holder and stick
Use of hose assembles
Ensure that the hose assembly is restrained from accidental
contact with the ﬂue outlet of an underbench oven or any
other hot surface of an adjacent appliance.
ELECTRICAL CONNECTION Gas Cooktops