Sony LocationFree LF-B20 Quick Start Manual page 31

Connect the Base Station to your video devices.
Connect the Base Station to your video device(s) using a SCART to A/V
cable with a yellow label.
Plug the IR Blaster into the IR BRASTER port on the rear of the Base
Station to configure the on-screen remote control.
After you complete these settings, turn on the video device(s).
IR BLASTER
1 2
IR BLASTER port 1 or 2
Both ports are available
IN 1
VIDEO
L
AUDIO
R
Scart to A/V cable
(yellow label; supplied)
Video Input 1 or 2
OUT
Video Output
 Tip IR Blaster
Orient the infrared
transmitter on the end
of the IR Blaster so that
it faces the infrared
receiver(s) on your
Remote control
PVR, DVD and STB.
infrared receiver
IR Blaster
Remote control
infrared transmitter
Remote control
infrared receiver
Video device
1