Honda GoldWing GL1500 2000 Owner's Manual page 173

H You Have a Flat Tire
Inflating a Tire with the On·Board Air Compressor
Your motorcycle has an on-board air compressor system whose
primary function is to allow you to easily adjust the air
pressure in your rear suspension (page 44). The compressor
also has an auxiliary outlet valve that can be used with an
optional Honda or commercially-available air supply
(extension) hose to inflate a tire or other inflatable item.
RIGHT SIDE
RIGHT SIDE
outlet valve
1.
Tum the ignition switch to the P (park) position.
2. Open the right saddlebag (page 39).
3. Connect the air supply (extension) hose to the outlet valve.
4. Remove the tire valve cap and connect the air supply
(extension) hose to the tire valve.
5. Push the OUTLET button on the air pressure control panel to
supply air pressure. The air pressure reading will not appear
in the display.
I
NOTICE
I
Operating the air pump for more than five minutes can
overheat its motor.
6. Remove the air supply (extension) hose from the tire and
outlet valve. (The on-board air compressor will not increase
rear suspension air pressure with the hose attached. Air will
bleed off through the h'Jse.)
166
Unexpected Problems