Poulan Pro 115267626 Instruction Manual
  1. Manuals
  2. Brands
  3. Poulan Pro Manuals
  4. Chainsaw
  5. 115267626
  6. Instruction manual
Poulan Pro 115267626 Instruction Manual

Poulan Pro 115267626 Instruction Manual

Poulan pro chain saw instruction manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l'outil au détaillant.
For Occasional Use Only
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
Poulan PRO
7349 Statesville Road
Charlotte, NC 28269
1-800-554-6723
www.poulan- -pro.com

Instruction Manual

Manual de Instrucciones
Manuel d'Instructions
115267626 Rev. 1
PP4218AV
Poulan PRO
850 Matheson Blvd. West
Mississauga, Ontario L5V 0B4
9/15/09 BRW
R

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 115267626 and is the answer not in the manual?

Questions and answers

Related Manuals for Poulan Pro 115267626

Summary of Contents for Poulan Pro 115267626

  • Page 1: Instruction Manual

    Tout défaut de le faire pourrait entraîner des blessures graves. Poulan PRO 7349 Statesville Road Charlotte, NC 28269 1-800-554-6723 www.poulan- -pro.com Instruction Manual Manual de Instrucciones Manuel d’Instructions 850 Matheson Blvd. West Mississauga, Ontario L5V 0B4 115267626 Rev. 1 PP4218AV Poulan PRO 9/15/09 BRW...

  • Page 2: Plan Ahead

    IDENTIFICATION OF SYMBOLS WARNING! can be dangerous! Careless or improper use can cause serious or even fatal injury. Always wear appropriate ear protection, eye protec- tion and head protection. Starting Reminder Move ON/STOP switch to the ON position. Slowly press primer bulb 6 times.

  • Page 3: Kickback Warning

    S Keep fuel and oil caps, screws, and fas- teners securely tightened. S Use only Poulan PRO accessories and re- placement parts as recommended. HANDLE FUEL WITH CAUTION S Do not smoke while handling fuel or while operating the saw.

  • Page 4: Maintain Control

    back toward the operator. Pull-In can occur when the moving chain contacts a foreign object in the wood in the cut along the bottom of the guide bar and the saw chain is suddenly stopped. This sudden stopping pulls the saw forward and away from the operator and could easily cause the operator to lose control of the saw.
  • Page 5 with a small radius tip which reduces the size of the kickback danger zone on the bar tip. A Reduced- -Kickback Guide Bar has been demonstrated to significantly re- duce the number and seriousness of kick- backs when tested in accordance with safety requirements for gasoline powered chain saws as set by ANSI B175.1.

  • Page 6: Assembly

    If this saw is to be used for com- mercial logging, a chain brake is required and shall not be removed or otherwise dis- abled to comply with Federal OSHA Regula- tions for Commercial Logging. WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

  • Page 7: Chain Tension

    Bar bolts Guide bar 6. Carefully remove the chain from the pack- age. Hold chain with the drive links as shown. CUTTERS MUST FACE IN DIIRECTION OF ROTATION Cutters Drive Links 7. Place chain over and behind clutch re- tainer, fitting the drive links in the clutch drum sprocket.

  • Page 8: Operation

    Bar Nuts 6. Use the screwdriver end of the bar tool to move chain around guide bar. 7. If chain does not rotate, it is too tight. Slightly loosen bar nuts and loosen chain by turning the adjusting screw turn counterclockwise. Retighten bar nuts.

  • Page 9: Fuel Requirements

    Poulan or Poulan PRO oil resists high temperature thinning. If Poulan or Poulan PRO bar and chain oil is not available, use a good grade SAE 30 oil. S Never use waste oil for bar and chain lubri- cation.

  • Page 10: Important Points To Remember

    rope per pull. Hold saw firmly while pulling starter rope. Starter Rope Handle Right Foot Through Rear Handle WARNING: Do not attempt to throw or drop- -start the chain saw. Doing so will put the operator at risk of serious injury due to loss of control of the chain saw.

  • Page 11: Operating Tips

    The brake is designed to stop the chain if kickback occurs. S The inertia- -activated chain brake is activated if the front hand guard is pushed forward, either manually (by hand) or automatically (by sudden movement). S If the brake is already activated, it is disengaged by pulling the front hand guard back toward the front handle as far as possible.

  • Page 12: Important Points

    onal to the line of fall. Plan a clear retreat path Direction of Fall FELLING LARGE TREES (6 inches (15 cm) in diameter or larger) The notch method is used to fell large trees. A notch is cut on the side of the tree in the de- sired direction of fall.

  • Page 13: Limbing And Pruning

    Overcutting Undercutting Undercutting involves cutting on the under- side of the log with top of saw against the log. When undercutting use light upward pres- sure. Hold saw firmly and maintain control. The saw will tend to push back toward you. WARNING: Never turn saw upside down to undercut.
  • Page 14 If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.
  • Page 15 Conditions which require guide bar mainte- nance: S Saw cuts to one side or at an angle. S Saw has to be forced through the cut. S Inadequate supply of oil to bar/chain. Check the condition of guide bar each time chain is sharpened.

  • Page 16: Chain Sharpening

    ING SCREEN Cleaning is required every 25 hours of op- eration or annually, whichever comes first. 1. Loosen and remove the nut from the ex- haust outlet cover. 2. Remove the exhaust oulet cover. 3. Remove spark arresting screen. Handle screen carefully to prevent damage.

  • Page 17: Carburetor Adjustment

    as shown. 80˚ 30˚ Hook Angle Right Too Much Hook Angle Wrong WARNING: Maintain the proper hook angle according to the manufacturer’s specifications for the chain you are using. Im- proper hook angle will increase the chance of kickback which can result in serious injury. 4.

  • Page 18: Troubleshooting Table

    Follow the mix instructions found on stabilizer containers. Run engine at least 5 minutes after adding stabilizer. Poulan/WEED EATER 40:1, 2-cycle engine oil (air cooled) is blended with fuel stabilizer. If you do not use this oil, you can add a fuel stabilizer to your fuel tank.

  • Page 19: Your Warranty Rights And Obligations

    Poulan PRO for this chain saw. This war- ranty does not cover tune- -up, spark plugs, filters, starter ropes, chain sharpening, bars, chains, and other parts which wear and re- quire replacement with reasonable use dur- ing the warranty period.
  • Page 20 PARTS: The use of add- -on or modified parts can be grounds for disallowing a warranty claim. Poulan PRO is not liable to cover fail- ures of warranted parts caused by the use of add- -on or modified parts. HOW TO FILE A...

This manual is also suitable for:

Pp4218av

Table of Contents