Mitsubishi Electric MELSEC iQ-R C Programming Manual page 20

■Accessible devices
The devices accessible for communication via a CC-Link IE Controller Network module are shown below.
• 'Batch' and 'Random' in the following table indicate as follows:
Batch: Batch write (mdSendEx function), batch read (mdReceiveEx function)
Random: Random write (mdRandWEx function), random read (mdRandREx function), bit set (mdDevSetEx
function), bit reset (mdDevRstEx function), random write by using a label name (mdRandWLabelEx
function), random read by using a label name (mdRandRLabelEx function)
• Bit devices can be accessed by using 'bit set' (mdDevSetEx function) and 'bit reset' (mdDevRstEx function).
• Device extension specifications (digit specification, bit specification and index specification) cannot be used.
• Accessing the own station
The accessible devices when accessing the CC-Link IE Controller Network module controlled by C Controller module are
shown in the following table.
: Accessible, : Not accessible
Device
RECV function
For details on replacement from the device types specified with an existing product, refer to the following section.
Page 190 Replacement of device type
<For other than the RECV function>
To access a CC-Link IE Controller Network module controlled by a C Controller module, use the method explained in the
following section. Accessing the own station by using a CC-Link IE Controller Network communication will result in the station
number/network number error.
Page 190 Replacement of device type
1 COMMON ITEMS
18
1.3 MELSEC Data Link Functions
Access method
Batch
Random
Access target CPU
R12CCPU-V

