Table of Contents
Advertisement
2. Tap the ON/OFF slider, located to the right of the NFC
field, to turn NFC ON
S Beam
When S Beam is activated, you can beam files to another
NFC-capable device by holding the devices close together.
You can beam images and videos from your Gallery, music
files from your Music Player, and more.
1. From the Home screen, tap
settings
S Beam.
2. Tap the OFF / ON icon to turn S Beam on
3. Touch the back of your device with another
NFC-capable device and the content transfers.
Nearby devices
This option allows you to share your media files with nearby
devices using DLNA and connected to the same Wi-Fi.
1. Connect to a Wi-Fi network. For more information, refer
to "Activating Wi-Fi" on page 108.
2. From the Home screen, tap
settings
Nearby devices.
3. Verify Wi-Fi Direct is enabled and you are paired with
the device you wish to detect and share content with.
110
.
ON
Settings
More
.
ON
Settings
More
DRAFT - Internal Use Only
DRAFT - Internal Use Only
4. Tap the OFF / ON icon to turn File sharing ON
5. Verify
(Nearby devices) displays at the top of the
screen.
6. At the Nearby devices prompt, tap OK.
7. Tap Shared contents, then check the media you would
like to share. Tap OK.
8. Tap Device name, then use the on-screen keyboard to
change the name shown to others. Tap Save.
9. Tap Access control, then what devices are allowed
access. Choose from Allow all or Only allowed devices.
The allowed devices are configured in the following
Allowed devices list.
10. Tap Allowed devices list, then select the connected
devices you would like to allow.
11. Tap Not-allowed devices list, then select the connected
devices you would like to not allow.
12. Tap Download to, then select the destination of any
downloaded (shared) content. Choose from USB
storage (phone) or SD card.
.
ON
Advertisement
Table of Contents
