Samsung Xpress M267x Series User Manual page 18

Fax menu
5
Receiving setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 33).
To change the menu options:
• Press (fax) > (Menu) > Fax Setup > Receiving on the control panel.
Item
Receive Mode Selects the default fax receiving mode.
Specifies the number of times the machine rings before
Ring to Answer
answering an incoming call.
Automatically prints the page number, and the date
Stamp Rcv Name and time of reception at the bottom of each page of a
received fax.
Initiates fax reception from an extension phone
plugged into the EXT socket on the back of the
Rcv Start Code machine. If you pick up the extension phone and hear
fax tones, enter the code. It is preset to *9* at the
factory.
Description
Item
Automatically reduces an incoming fax page to fit the
Auto Reduction
size of the paper loaded in the machine.
Discards a specific length from the end of the received
Discard Size
fax.
Blocks any unwanted faxes that you stored in the
Junk Fax Setup memory as junk fax numbers. This setting may not be
available depending on your country.
Enables a user to use a single telephone line to answer
several different telephone numbers. You can set the
machine to recognize different ring patterns for each
DRPD Mode
number. This setting may not be available depending
on your country (see "Receiving faxes using DRPD
mode" on page 265).
Prints the received fax data on both sides of the paper.
a
Duplex Print
You can save the paper usage.
Resets the value or setting to the printer's out-of-box
Change Default
state.
Setting this option to ON provides the ability to send or
receive a fax while the line is busy. You can select to
send or receive a fax by either picking up the extension
Manual TX/RX
phone receiver and pressing the Start button or by
pressing the
the Start button.
a. M287xFD/M287xFW/M287xHN only.
Description
( On Hook Dial ) button and pressing
2. Useful Setting Menus
165