General Power Tool Safety Warnings - Porter-Cable 90562807 Instruction Manual

18 volt cordless rotary saw
Table of Contents

Advertisement

Available languages

Available languages

90562807 PC1800SS rotary saw.qxd:??????-00 Cir Saw book

General Power Tool Safety Warnings

:
Read all safety warnings and instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust
c) Keep children and bystanders away while operating a power tool.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
c) Do not expose power tools to rain or wet conditions.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
f) If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected supply.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medication.
b) Use personal protective equipment. Always wear eye protection.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool.
d) Remove any adjusting key or wrench before turning the power tool on.
e) Do not overreach. Keep proper footing and balance at all times.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used.
3/24/10
2
8:27 AM
Page 2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc1800ss

Table of Contents