Chapter 2: Installation Process; Verifying The Box Contents - Extreme Networks ExtremeWireless WS-AP3915i-FCC Installation Manual

2
Installation Process

Verifying the Box Contents

Mounting to a Dry/Wood Wall or Solid Flat Ceiling
Mounting to a Junction/Gang box
Mounting to a Suspended/Drop Ceiling
Connecting the Power Supply
Follow this procedure to install the AP3915i:
1 Verify the box contents.
2 Review the Safety
3 Mount the AP to a
suspended or drop
Note
An optional bracket P/N 30516 (WS-MBI-WALL04 wall mounting bracket) is sold
separately. This bracket is used for mounting the AP on a flat ceiling, suspended or drop
ceiling, or junction/gang box.
4 Connect the power supply
Verifying the Box Contents
Before you install the AP3915i access point, make sure that you have all the necessary parts.
1 Verify that the box contains the following items:
Table 5: AP3915i Box Contents
Quantity
1
1
1
2 Perform a visual inspection of the AP for any signs of physical damage. Contact Extreme Networks if
there are any signs of damage.
Note
Before mounting the AP3915i, read the
ExtremeWireless™ AP3915i FCC/ROW Installation Guide
Guidelines.
Flat Ceiling. Alternatively, you can also mount the AP to a
ceiling.
to the AP3915i access point.
Items
AP3915i Quick Reference Guide
ExtremeCloud ™ Quick Start Card
WS-AP3915i AP
Safety Guidelines.
junction/gang box, or a
9