Siemens SIMATIC PCS 7 Service Manual page 70

Adaptations in the PCS 7 project on the ES
7.8 Work for the OS in SIMATIC Manager
Requirements
● The PC station has been configured.
● The configuration in CFC and SFC has been completed.
Note
If you have changed unit and operator texts of the block types in the master data library,
be sure to set your default language as the "Language for display devices".
Procedure
Note
You can find additional information about the compilation options in the configuration manual
Process Control System PCS 7; Engineering Station .
1. Select the object (multiproject, project, station) in SIMATIC Manager that you wish to
compile or compile/download.
2. Select the PLC > Compile and download objects command in SIMATIC Manager.
The "Compile and download objects" dialog box opens.
3. Open the tree structure.
4. Activate the check box in the "Compile" column for all objects that you want to compile.
5. Click the "Operating State" button and check the operating states of your objects (RUN,
activated, etc.) so that you can make the correct settings for compilation.
6. Select the OS that you wish to compile.
7. Click "Edit".
The "Settings: Compile OS ... Areas ..." dialog box opens.
8. Click "Next".
The "Settings: Compile OS ... Network Connections ..." dialog box opens.
9. Click "Next".
The "Settings: Compile OS ... Compilation Data and Scope of Compilation" dialog box
opens.
10.In the "Scope" group, activate the "Entire OS" and "With memory reset" check boxes.
11.Click "Apply".
Note
Once you have completed your settings for compiling an operator station, please wait until
the compilation settings have been saved and the download dialog box appears.
12.Make the required settings for the individual objects.
13.Click "Help" in the dialog box for detailed information about the settings.
14.Click the "Start" button.
Compilation starts.
70
Software update without utilization of new functions
Service Manual, 03/2016, A5E36200133-AA