Philips rc9800i User Manual page 27

Touch screen remote control
Hide thumbs Also See for rc9800i:
Table of Contents

Advertisement

RC9800i Touch Screen Remote Control - User Manual
Philips Innovative Applications
In the screen 'Philips CD IR Setup', tap Advanced.
The following screen appears:
Select a codeset.
The list is populated with several buttons.
Select a button and tap Try.
If the device responds, tap OK.
or
If the device doesn't respond, tap Learn.
Aim the IR sender of the original remote control to the RC9800i's IR
sensor.
Press the Mute hard key on the remote.
A screen with the message 'Learning ...' appears and the codeset will
be determined.
If learning succeeded, you can optionally enter more detailed information.
Note
You find also red buttons in the list. These red buttons are buttons you're
device does not know yet. To learn these buttons, select them and tap Learn.
Configure Device
After setting up all the rooms and devices, you can add more detailed
information concerning your devices. These questions are being asked to
define how best to control your device, questions concerning
Power on;
Power on-delay;
Channel tuning;
Inter-digit delay;
Input selection;
Power-on state.
To navigate through these questions, use the Back and Next soft buttons.
Getting the Settings Right
Page 27 of 39

Advertisement

Table of Contents
loading

Table of Contents