Philips rc9800i User Manual page 24

RC9800i Touch Screen Remote Control - User Manual
Philips Innovative Applications
Acquiring an IR Codeset
Good To Know: About IR Codes
Your RC9800i sends out infrared (IR) signals to your devices, which will
execute an action, e.g. the VCR starts recording.
For every action the RC9800i sends out a specific IR signal, called an 'IR
code'. Your RC9800i contains a huge database that contains numerous IR
codes for all kinds of devices.
The RC9800i is set up by default to operate Philips and compatible devices. If
you possess other device brands, the RC9800i has to 'learn' the specific IR
codes for your device from the original Remote Control (RC) that
accompanies the device.
@@@ screens niet finaal. L&M niet volledig te testen!
In the following steps the wizard will ask you to learn the IR code for the
Philips CD.
In the screen 'Philips CD IR Setup, select how to control the device.
10
The selected item is highlighted.
There are 3 different ways to learn your IR codes:
If you have the original remote control for the device, choose Learn &
Match;
If you don't have the original remote control or Learn & Match doesn't work
properly, choose Autoscan;
If Learn & Match nor Autoscan work properly, choose Advanced.
Learn & Match
In this method you use your original remote control to determine the IR
codeset that your RC9800i has to use.
In the screen 'Philips CD IR Setup', tap Learn & Match.
1
The screen 'Learn & Match' appears.
To start the Learn & Match progress, tap OK.
The following screen appears:
Getting the Settings Right
Page 24 of 39