Ir Extender Setup (If Applicable) - Philips rc9800i User Manual

RC9800i Touch Screen Remote Control - User Manual
Philips Innovative Applications
IR Extender Setup (Skip If Not
Applicable)
@@@
Note
If you don't have a NetX, you may skip this section by pressing Skip.
Good To Know: About the NetX
Your RC9800i is only compatible with the NetX IR Extender. The NetX is a
part of the Philips Connected Planet solution and extends the control of the
RC9800i beyond the line of sight and into multiple rooms/rooms. No wall,
closet or obstacle can prevent you from using the RC9800i to control a device
that is out of sight. This gives you the ultimate device control around the
house. Via the NetX your RC9800i can control your A/V and Home Control
devices from virtually any room in your home.
The NetX receives Radio Frequency (RF) signals sent out by RC9800i via
your WiFi 802.11b wireless home network and converts them into infrared
(IR) signals. These IR signals are then sent out to your IR controlled A/V and
home control devices.
Check the NetX Getting Started Guide for more information.
Tap Next.
The screen 'IR Extenders Setup' appears.
Tap Add.
The screen 'Looking for IR Extenders' appears.
Getting the Settings Right
Page 21 of 39