RC9800i Touch Screen Remote Control - User Manual
The USB Connector
Philips Innovative Applications
The Cradle as Media Adapter
Besides using the cradle for charging the RC9800i, you can also use it as an
audio-link Media Adapter. When you connect the cradle to the amplifier of
your audio system by means of an audio extension cable (not included), the
cradle will become an audio-link Media Adapter.
To turn the cradle into an audio-link Media Adapter, proceed as follows:
Plug one end of the audio extension cable (not included) into the cradle.
Plug the other end of the cable into the amplifier of your audio system.
Dock the RC9800i in the cradle.
If the RC9800i is actually playing music via its speaker, the RC9800i is
muted and all audio content will be transferred from the RC9800i to the
audio device.
Note
The audio extension cable is not included. For more information on audio
extension, see page Error! Bookmark not defined..
The mini USB connector is located at the left-hand side of your RC9800i.
You will need this USB connector to connect to a PC in order to download
new firmware when it becomes available. For further information, see
Upgrading the Firmwareon page 37
Pick Up Your RC9800i and Take a Good Look
Page 16 of 39