Mounting of several readers on metal frames or racks
Any reader mounted on metal couples part of the field to the metal frame. There is normally
no interaction as long as the minimum distance D and metal-free areas a, b are maintained.
However, interaction may take place if an iron frame is positioned unfavorably. Longer data
transfer times or sporadic error messages at the communication module are the result.
Mounting of several readers on metal racks
System Manual, Release 04/2006, J31069 D0166-U001-A2-7618
Problem: Interaction between readers
Increase the distance D between the two readers.
Introduce one or more iron struts in order to short-
circuit the stray fields.
Insert a non-metallic spacer of 20 to 40 millimeter
thickness between the reader and the iron frame. This
will significantly reduce the induction of stray fields on
RF300 system planning
4.4 Installation guidelines