RF300 system planning
4.3 Relationship between the volume of data and the transponder speed
The curves shown here show the relationship between the speed of the RF320T, RF340T,
RF350T and RF360T transponders and the RF350R reader and the corresponding volume
They should make it easier to preselect the transponders and the plug-in antenna ANT1 for
The following table is used to calculate the curves.
The indicated speeds are applicable for operation without presence check.
Length of the transmission window (L)
Working distance (Sa)
Relationship between speed and volume of data (reading/writing from FRAM) in dynamic
operation when using the RF350R with ANT1 and RF320T
System Manual, Release 04/2006, J31069 D0166-U001-A2-7618