Setting The Audio Input Level; Setting The +48 V Power Supply - Sony WRT-8P Operating Instructions Manual

enters transmit mode with the selected RF
output power level.
Setting the audio input
level
You can adjust the audio input level,
regardless of the INPUT selector position.
1
Set the INPUT selector according to
the equipment connected to the audio
input connector.
When a microphone is connected to
the audio input connector, set the
selector to MIC position; when a
mixer, etc. is connected, set it to LINE
position.
2
Turn the LEVEL control so that the
AF/PEAK indicator lights up green
continuously.
When the INPUT selector is set
to MIC position
Reference input level can be adjusted
within a range shown below.
When the INPUT selector is set
to LINE position
Reference input level can be adjusted
within a range shown below.
Occasional lighting of the AF/PEAK
indicator in red is acceptable.
Setting the +48 V power
supply
You can set the +48 V power supply for the
electric condenser microphone in setting
mode.
1
Set the transmitter to the setting mode.
2
Press the SET button repeatedly until
the "MIC" or "MIC+48" indication
appears.
or
3
Press the + button to select "MIC+48,"
or press the – button to select "MIC."
Select "MIC+48" to supply the +48 V
power to the connected microphone
when the INPUT selector is set to MIC
position in transmit mode; select
"MIC" to cancel the +48 V power
supply.
4
Set the POWER switch to OFF to
complete the setting, or press the SET
button to set other items.
The results are stored in memory. The
change becomes effective the next time you
turn on the transmitter by setting the
POWER switch to ON, and the transmitter
enters transmit mode with the selected
power supply setting.
Settings 11