Dell XC730-16G Web-Scale Hyperconverged Appliance Solutions Manual page 15

For information about the supported Dell Nautilus version number, see the Supported hardware, firmware, and software section in
this document.
To download the Dell Nautilus Firmware Update Utility for SAS and SATA disk Solid State Drives (SSDs):
1. Go to Dell.com/support/drivers.
2. Under the Customized support section, in the Enter your Service Tag or Express Service Code box, type the Service Tag of
your Dell XC730-16G, and then click Submit.
NOTE: If you do not have a Service Tag, select Detect My Product to allow the system to automatically detect your
Service Tag, or select Choose from a list of all Dell products to select your product from the Product Selection page.
3. On the Product Support page, click Drivers & downloads.
4. From the Operating System drop-down menu, select Not Applicable.
5. Go to the SAS Drive section.
6. Search for Dell Nautilus Firmware Utility for SAS and SATA disk and SSDs.
7. Click Download. Click Download again to download the .exe file. In your Download folder, locate the latest version of Dell
Nautilus and click to expand the compressed files.
8. In the extracted folder, run the USBMake Utility.
9. Create the bootable Nautilus package and perform one of the following tasks:
• To create a bootable CD or DVD image (ISO), click Create Bootable CD Image and follow instructions. Burn the .iso image
file to CD or save the bootable ISO on a management workstation.
• Connect a USB flash drive to the system and follow instructions to create a bootable USB flash drive.
15